Northeast
Implement
Products
Check Our Our Other Brands!
SplitMaster 26 Chassis
The professional horizontal splitter with
longitudinal tractor chassis for mobile
applications.
The SplitMaster 26 for large volumes of wood. With a splitting power of 28.66 t, the horizontal splitter
copes with almost every log. The log lifting device and the optimum working height ensure ergonomic
working. The Easy splitting knife is available as an option – firewood processing at its easiest, most
ergonomic and most efficient. Mobile with longitudinal tractor chassis.
28.66 t
splitting power max.
•
Autospeed functionality
•
Max. billet length 49.21 in, cylinder stroke
51.18 in
•
Up to 8 billets per work cycle
•
Splitting knife for 4 parts suitable for log
diameters 0-20 in as standard
•
Large timber support table
•
Tractor drive: Universal joint shaft required
•
Longitudinal chassis: Tractor chassis max. 10
km/h without brake system, parking brake,
draw bar eye Ø 38 mm, draw bar eye height
adjustable and support foot, no light system.
Not for use on public roads, only for use on
private premises. Observe the national road
traffic regulations!
49.21 in
billet length max.
13 | 11 in/s
splitting | return
speed max.
SplitMaster 26 Chassis
Overview
SplitMaster 26 Chassis Parts and Options
Note: All measurements were converted from Metric into
Imperial/English units of measurements. Therefore most
measurements are an approximation.
SplitMaster 26 Chassis Drive Type
Article No.
Type
Propulsion
Weight lbs.
M6651ST13H
M6671ST13H
PZG
PZG-E15D
2866
3130.56
• Tractor
• 15 kW E-motor 400V, S6, CEE 32A, Double-stage pump
Forward level
in/s
Return in/s
5.9 - 13
•
5.9 - 13
•
4.33 - 9.1
11
•
11
•
7.87
Special equipment
Article No.
Description
L
C
Light bar
Oil cooler
Tractor, power consumption 18–37 kW at 300–650 rpm.,
built-in oil pump with max. capacity 87 l/min
M6666ST13H
PZG-E7.5D
3064.43
•
5.9 - 13
•
3.94 - 8.66
• Tractor
• 7.5 kW E-motor 400V, S6, CEE 16A, Double-stage pump
Accessory equipment
Article No.
Description
F0002605
F0000081
Chain for cable puller, 3.3 ft, 2-log hauling hook for 2204.62 lbs
Gripping pliers for cable puller for log diameters up to 31.5 in ,approx. 31.97 lbs
FW
MI108
Radio-controlled rope winch, pulling power 2204.62 lbs, rope 40 m. Can only be used with PTO
operation with max. 540 rpm, cannot be used with PZGE machines in e-mode! 3,300.00
Reduced price SplitMaster without lifting device. Reduced price SplitMaster without lifting device
F0000080
F0002179
Gripping pliers for cable puller, for log diameters up to 25.59 in ,approx. 19.84 lbs
Hour counter for machines with E-drive
F0001806
Hour counter for machines with Z-drive, with speed display
F0003169
F0002027
Knife changing device
Light unit, push-on
SAHL
Surcharge for road chassis instead of tractor chassis T13, overrun brake 50 mph, height-
adjustable articulated drawbar, ball hitch, with light bar
Splitting knife "Easy"
with lumber pick
Longitudinal chassis
for SplitMaster
F0002421
F0002773
Separator plate between splitting trough and timber support
Splitting knife "Easy" with lumber pick
F0002023
F0002025
Splitting knife for 2 parts
Splitting knife for 4 parts (Ø 0–8 in), standard
F0001939
Splitting knife for 6 parts (Ø 2.4-8 in)
F0002024
F0001666
Splitting knife for 8 parts (Ø 2.4-8 in)
Splitting trough extension for splitting short timber
Z2000653
Universal PTO shaft
Y
Surcharge SplitMaster with "Easy" splitting knife and lumber pick (no splitting knife for 4 parts)
Copyright © 2016 Northeast Implement
Northeast Implement
&
