Northeast
Implement
Products
Check Our Our Other Brands!
SplitMaster 26
The professional horizontal splitter with
maximum power for longer billets.
The SplitMaster 26 for large volumes of wood. With a splitting power of 28.66 t, the horizontal splitter
copes with almost every log. The log lifting device and the optimum working height ensure ergonomic
working. The Easy splitting knife is available as an option – firewood processing at its easiest, most
ergonomic and most efficient.
28.66 t
splitting power max.
•
Autospeed functionality
•
Max. billet length 49.21 in, cylinder stroke
51.18 in
•
Up to 8 billets per work cycle
•
Splitting knife for 4 parts suitable for log
diameters 0-20 in as standard
•
Timber support table
•
Ergonomic splitting table height 31.5 in
•
E-motor: Motor circuit breaker and phase
inverter
•
Tractor drive: Universal joint shaft required,
three-point linkage cat. I + II
49.21 in
billet length max.
13 | 11 in/s
splitting | return
speed max.
SplitMaster 26
Overview
SplitMaster 26 Parts and Options
Note: All measurements were converted from Metric into
Imperial/English units of measurements. Therefore most
measurements are an approximation.
SplitMaster 26 Drive Type
Article No.
Type
Propulsion
Weight lbs.
M8410H
M8405H
E15D
E7,5D
2729.32
2438.31
7.5 kW E-motor 400V, S6, CEE 16A, double-stage pump
Forward level
in/s
Return in/s
4.33 - 9.1
3.94 - 8.66
7.87
7.48
Special equipment
Article No.
Description
C
FW
Oil cooler
Radio-controlled rope winch, pulling power 2205 lbs, rope 40 m. Can only be used with PTO operation
with max. 540 rpm, cannot be used with PZGE machines in e-mode! 3,300.00
15 kW E-motor 400V, S6, CEE 32A, double-stage pump
M8400SH
PZG
2438.31
5.91 - 13
Tractor, power consumption 18–37 kW at 300–650 rpm, built-
in oil pump with max. capacity 87 l/min
Accessory equipment
Article No.
Description
F0002605
F0003747
Chain for cable puller, 1 m, 2-log hauling hook for 2205 lbs
Gripping pliers for cable puller for log diameters up to 31.5 in, approx. 32 lbs
L
Y
Surcharge for large timber support table 55 × 79 in, weight approx. 154 lbs. Not possible in
combination with "Easy" splitting knife (Y)!
Surcharge SplitMaster with "Easy" splitting knife and lumber pick (no splitting knife for 4 parts)
F0003746
F0002179
Gripping pliers for cable puller, for log diameters up to 25.6 in, approx. 19.8416 lbs
Hour counter for machines with E-drive
F0001806
Hour counter for machines with Z-drive, with speed display
F0003120
F0002027
Knife changing device
Light unit, push-on
M8420SH
PZG-E15D
2755.78
M8415SH
PZG-E7,5D
2645.55
•
5.91 - 13
•
3.94 - 8.66
•
11
•
7.48
• Tractor
• 7.5 kW E-motor 400V, S6, CEE 16A Double-stage pump
• Tractor
• 15 kW E-motor 400V, S6, CEE 32A Double-stage pump
•
5.91 - 13
•
4.33 - 9.1
•
11
•
7.87
DT
Tractor transverse chassis SplitMaster 26/30, max. 6.21 mph without brakes, drawbar eye.
Not for use on public roads, only for use on private premises (e.g. lumberyards). No lights
Splitting knife "Easy"
with lumber pick
Transverse chassis for
SplitMaster
F0003383
F0003181
Separator plate between splitting trough and timber support (F0003181) and splitting trough
extension for short timber (F0003121), not possible for DT
Separator plate between splitting trough and timber support, not possible for DT
F0003141
F0003074
Splitting knife "Easy" with lumber pick
Splitting knife for 2 parts
F0003075
Splitting knife for 4 parts (Ø 0–20 in), standard
F0003044
F0003069
Splitting knife for 6 parts (Ø 6-20 in)
Splitting knife for 8 parts (Ø 6-20 in)
F0003121
Splitting trough extension for splitting short timber
Z2000653
Z2000649
Universal PTO shaft
Universal PTO shaft for transverse tractor chassis DT
Copyright © 2016 Northeast Implement
Northeast Implement
&
